This chapter describes End System Intermediate-System Protocol (ESIS) messages. For information on message content and how to use the message, refer to the Introduction.
| ESIS.001 |
Level: UE-ERROR
Short Syntax: ESIS.001 ESIS input que ovflw
Long Syntax: ESIS.001 ESIS input queue overflow
Description: The ESIS task input queue has overflowed, packet is dropped.
| ESIS.002 |
Level: UE-ERROR
Short Syntax: ESIS.002 rcvd incmplt pkt
Long Syntax: ESIS.002 received incomplete packet
Description: A packet fragment recognized as an ESIS packet was received.
| ESIS.003 |
Level: UE-ERROR
Short Syntax: ESIS.003 rcvd pkt bad chksm= pkt_chksum
Long Syntax: ESIS.003 received packet with a bad checksum = pkt_chksum
Description: An ESIS packet was received but had a bad checksum.
| ESIS.004 |
Level: UE-ERROR
Short Syntax: ESIS.004 rcvd pkt bad vers # = version_number
Long Syntax: ESIS.004 received packet with a bad version number (vers = version_number)
Description: An ESIS packet was received but had a bad or unsupported version number.
| ESIS.005 |
Level: UE-ERROR
Short Syntax: ESIS.005 rcvd pkt bad typ # = type_field
Long Syntax: ESIS.005 received packet with a bad type field (vers = type_field)
Description: An ESIS packet was received but had a bad or unsupported type field.
| ESIS.006 |
Level: UE-ERROR
Short Syntax: ESIS.006 no iob avail to snd hello
Long Syntax: ESIS.006 no i/o buffer available to send hello
Description: An attempt to send an ESIS hello failed because of a lack of system i/o buffers.
| ESIS.007 |
Level: UE-ERROR
Short Syntax: ESIS.007 cnnt snt hello pkt hndlr err
Long Syntax: ESIS.007 cannot send a hello packet, handler error
Description: An ESIS hello packet coundn't be sent because of a handler error.
| ESIS.008 |
Level: P-TRACE
Short Syntax: ESIS.008 sent hello source_NSAP on int interface_#
Long Syntax: ESIS.008 sent hello packet with source nsap source_NSAP on int interface_#
Description: An ESIS hello packet was sent out on an interface.
| ESIS.009 |
Level: UE-ERROR
Short Syntax: ESIS.009 rcvd hello packet with a bad header
Long Syntax: ESIS.009 rcvd hello packet with a bad header
Description: Received hello packet with a holding time or reserved field.
| ESIS.010 |
Level: UE-ERROR
Short Syntax: ESIS.010 rcvd hello bad nsap source_NSAP
Long Syntax: ESIS.010 received hello with bad nsap source_NSAP
Description: An ESIS hello packet was received with a bad nsap or one that overran the packet.
| ESIS.011 |
Level: UE-ERROR
Short Syntax: ESIS.011 rcvd hello pkt bad opt
Long Syntax: ESIS.011 received packet with a bad optional parameter
Description: An ESIS CLNP data packet was received with bad option parameter(s).
| ESIS.012 |
Level: P-TRACE
Short Syntax: ESIS.012 rcvd hello from source_NSAP int interface net network_name
Long Syntax: ESIS.012 rcvd hello packet with source nsap source_NSAP on int interface, net network_name
Description: An ESIS hello packet was received on the specified interface.
| ESIS.013 |
Level: UE-ERROR
Short Syntax: ESIS.013 rcvd hello unsp dom src source_NSAP
Long Syntax: ESIS.013 rcvd hello packet unsupported domain source_NSAP
Description: An ESIS hello packet was received with an unrecognized IDI.
| ESIS.016 |
Level: UE-ERROR
Short Syntax: ESIS.016 tmd out rte reac source_NSAP
Long Syntax: ESIS.016 timed out route reactivated source_NSAP
Description: An ESIS hello packet was received with a route that had been previously timed out.
| ESIS.017 |
Level: UE-ERROR
Short Syntax: ESIS.017 no rsrc to snd rdrct
Long Syntax: ESIS.017 no resources to send redirect
Description: An ESIS redirect packet could not be sent due to a lack of resources.
| ESIS.018 |
Level: UE-ERROR
Short Syntax: ESIS.018 rdrct nt snt hndlr err
Long Syntax: ESIS.018 redirect not sent, handler error
Description: An ESIS redirect packet could not be sent due to a handler error.
| ESIS.019 |
Level: P-TRACE
Short Syntax: ESIS.019 sent rdrct to: dest_NSAP
Long Syntax: ESIS.019 sent redirect packet to: dest_NSAP
Description: An ESIS redirect packet was sent out on an interface.
| ESIS.020 |
Level: UE-ERROR
Short Syntax: ESIS.020 tmd out rte source_NSAP
Long Syntax: ESIS.020 timed out route source_NSAP
Description: An ESIS hello route has been timed out.
| ESIS.021 |
Level: UI_ERROR
Short Syntax: ESIS.021 Unable to allocate resources for a new ES adjacency
Long Syntax: ESIS.021 Unable to allocate resources for a new ES adjacency
Description: We were unable to get an adjacency structure for a new end system adjacency.
| ESIS.022 |
Level: UE_ERROR
Short Syntax: ESIS.022 hello PDU dropped, rcvd over p-to-p cir cct_num
Long Syntax: ESIS.022 hello PDU dropped, received over point-to-point circ cct_num
Description: An ESIS hello PDU was received over a point-to-point circuit - the packet was dropped because ESIS does not run over point-to-point circuits.
| ESIS.023 |
Level: UE_ERROR
Short Syntax: ESIS.023 hello PDU dropped, no matching area address
Long Syntax: ESIS.023 ESIS hello PDU dropped, no matching area address
Description: An ESIS hello PDU was dropped because the area address portion of its source NSAP didn't match one of the router's manual area addresses.
| ESIS.024 |
Level: P-TRACE
Short Syntax: ESIS.024 dropped hello from source_NSAP int interface net network_name manual ES adjacency exists
Long Syntax: ESIS.024 dropped hello packet with source nsap source_NSAP on int interface, net network_name - manual ES adjacency exists
Description: An ESIS hello packet was dropped on the specified interface because a manual adjacency exists for the ES.